Related System Design Of Stool Mould


We are one of the professional plastic mold manufacturers, among which Stool Mould is our product. Here are the manufacturing information related to the plastic stool mold:

 

We are one of the professional plastic mold manufacturers, among which Stool Mould is our product. Here are the manufacturing information related to the plastic stool mold:
The furniture industry is highly competitive and the products sell well. In order to keep up with the ever-increasing demands of consumers, manufacturers must choose molds with the best cooling system, use slider ejection systems and precision exhaust molds to shorten cycle time.
We have expertise in developing molds, which can be used for Mono single chairs with or without armrests, adult chairs and baby chairs with interchangeable inserts (backrest design), round table molds, rectangular table molds, square table molds, babies Table mold, stool mold, rack mold.
We believe that product design should be analyzed in detail to help manufacturers obtain feasible costs in plastic molding, increase production speed, avoid mold repair costs and modifications, and ensure the quality of the design to ensure long-term sales of the product. Final product. We recommend that product manufacturers choose P20 steel, 2316 or 2738 steel to produce plastic furniture. Mold flow analysis and achieving steel hardness are very important for the service life of the mold. The chair and table molds are large molds that also require good polishing and chrome plating.
The key to high-standard furniture molds is to use a collaborative approach to achieve good mold design, which helps reduce maintenance and therefore extend mold life.
In furniture molds, spare parts may be damaged due to the continuous opening and closing of the mold, so it is very important to use high-quality accessories. Similarly, with a good hardening mold, you will be able to avoid flash on the ends and sides of the product and avoid any form of repair. The hardness of the chair and table mold is between 38 and 40HRC
Fully inspect the mold to ensure that the structural spare parts are standardized as required. Strictly inspected project managers and quality control personnel ensure product quality. If errors are found, they can be corrected in time. All aspects of mold standardization, including cooling system, hydraulic oil channel system and hot runner system, have been thoroughly inspected.
After understanding the above information about the stool mold, if you are interested in our products, you are welcome to contact us.

 

23 Views